Maytag CENTENNIAL MTW5900TW0 Technical Education page 18

Centennial top-load washer
Hide thumbs Also See for CENTENNIAL MTW5900TW0:
Table of Contents

Advertisement

COMPLETE THE INSTALLATION
1.
Check the electrical requirements. Be
sure that you have the correct electrical
supply and the recommended grounding
method (see "Electrical Requirements").
2.
Check that all parts are now installed. If
there is an extra part, go back through the
steps to see which step was skipped.
3.
Check that you have all of your tools.
4.
Check that the yellow shipping materials
were completely removed from the lower
back of the washer.
5.
Dispose of / recycle all packaging materi-
als.
6.
Check that the water faucets are on.
7.
Check for leaks around faucets and inlet
hoses.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
8.
Plug into a grounded 3 prong outlet.
9.
Remove the protective film on the console
and any tape remaining on the washer.
10. Read "Washer Use."
11. To test and to clean your washer, mea-
sure 1/2 of the normal recommended
amount of powdered or liquid detergent
and pour it into the washer basket or
detergent dispenser (on some models).
Close the lid. Select any cycle, and then
pull the cycle control knob out to start the
washer. Allow it to complete one whole
cycle.
2-10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents