3.
To remove the transmission:
a) Remove the agitator (see step 2).
b) Slide the agitator clip and washer up
and off the transmission shaft.
Agitator Clip
c) Remove the pump and motor (see page
4-10 for the procedure).
Agitator Washer
4-13
d) Squeeze the locking tabs together and
push the wire standoff out of the trans-
mission mounting hole.
e) Remove the three 1/2˝ bolts from the
transmission.
Transmission Bolts
f) Pull the transmission away from the
washer and remove it.
g) Remove the isolator from the motor
coupler.
Isolator
Continued on the next page.
Wire
Standoff
Remove
Transmission