Maytag CENTENNIAL MTW5900TW0 Technical Education page 43

b) Lift the basket off the drive block, and
remove the basket from the outer tub.
Outer Tub
8. To remove the outer tub:
a) Disconnect the end of the water level
hose from the side of the outer tub.
Water Level Hose
b) Loosen the clamp and remove the end
of the tub-to-pump hose from the bot-
tom of the outer tub (see the top right
photo).
c) Unhook the tub springs from the left
and right front tub spring brackets.
d) Remove the two hex-head screws from
the left and right front tub spring brack-
ets and remove the brackets.
Basket
Drive Block
Front Tub Spring Bracket Screws
Left Front Tub Spring
e) Unhook the counterbalance spring
from the rear tub spring bracket and
the frame.
f) Unhook the rear tub spring from the
tub spring bracket.
g) Remove the two hex-head screws
from the rear tub spring bracket and
remove the bracket.
Rear Tub Spring Bracket Screws
Rear Tub Spring
Counterbalance Spring
h) Turn the outer tub while you lift it off
the support assembly.
OUTER TUB REASSEMBLY NOTE: When
you reinstall the outer tub, install the rear tub
spring bracket first.
Continued on the next page.
4-17
Tub-To-Pump Hose