Table of Contents
Advertisement
5.
To remove the temperature switch:
a) Pull the knob off the switch shaft.
b) Disconnect the wire connector from
the switch terminals.
c) Lift the locking tab so that it clears the
hole in the console, rotate the switch
approximately 30° clockwise so that
the square on the front aligns with the
cutout, and remove the switch from the
console.
Wire Connector
6.
To remove the soil level or option
switch:
a) Pull the knob off the switch shaft.
b) Unlatch and disconnect the wire con-
nector from the switch terminals.
c) Lift the locking tab so that it clears the
hole in the console, rotate the switch
approximately 30° clockwise so that
the square on the front aligns with the
cutout, and remove the switch from the
console.
Soil Level Switch
Wire Connector
Lift Tab
Temperature Switch
Rotate
30°
Lift
Tab
Option Switch
Lift Tab
7.
To remove the water level pressure
switch:
a) Pull the pressure hose off the switch.
b) Disconnect the wire connector from
the switch terminals.
c) Lift the locking tab, rotate the switch
approximately 30° clockwise so that
the square on the front aligns with the
cutout, and remove the switch from the
console.
Water Level Pressure Switch
Wire Connector
8.
To remove the power supply cord:
a) Lift up on the locking tab and discon-
nect the power supply cord connector
from the main harness.
b) Press the locking tab, and pull the
strain relief and power supply cord out
of the rear panel cutout.
4-3
Lift Tab
Rotate
30°
Pressure Hose
Remove Power Supply
Cord & Strain Relief
Tab
Power Supply
Cord Connector
Hide quick links:
Advertisement
Table of Contents
