Yardworks 060-3984-0 Owner's Manual page 14

IMPELLOR REPLACEMENT
1
1. Remove the nut from the
left hand side of the impellor
shaft.
4
4. Remove the nut from the
impellor shaft.
7
7. Remove the pulley and
belt.
10
spacer washer
10. Withdraw the old /
damaged impellor. Be sure to
keep the 2 spacer washers
from the right hand side of the
impellor.
MAINTENANCE
2
2. Remove the 10 screws
from the side cover.
5
5. Remove the 3 screws
holding the pulley support
plate.
8
8. Remove the impellor shaft
nut from the right hand side.
11
11. Insert the impellor shaft in
the new impellor and place
the 2 washers on the right
hand side.
14
3
spring
3. Be sure not to lose the 2
springs.
6
spacer washer
6. Remove the plate and the
two spacer washers.
9
9. Withdraw the impellor shaft
from the left hand side.
12
12. Place the impellor and
shaft back into the front
scoop.