Yardworks 060-3984-0 Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
USING THE CORD RETAINER
This Snow Thrower is equipped with a cord retainer in order to prevent the extension cord from
disconnecting from the power cord while the Snow Thrower is in use.
NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer
and plugged into the Snow Thrower.
To use the cord retainer:
1. Fold the extension cord to form a tight loop near the retainer.
2. Push the loop through the bottom hole in the retainer.
3. Slide the loop over the retaining clip, and pull down until the cord is secured.
NOTE: Use a CSA or CuL-approved extension cord.
CORD
RETAINER
Fig. 2
10