NEC Electra Elite DSS User Manual page 2

Electra Elite DSS/BLF
1
G
e n e r a l I n f o r m a t i o n
The following should be considered when reviewing this user guide:
• Attendant console keys can be assigned as Direct Station Selection/Busy Lamp
Field (DSS/BLF), Call Arrival or as additional central office lines (CO Add-On
Console.)
• Refer to Multiline Telephone User Guide for additional information on telephone
operation.
• All operational instructions assume Prime Line Pickup is assigned to intercom
dial tone, Ringing Line Preference is assigned, a Call Appearance and Call
Arrival key is assigned to all multiline telephones and only a single tenant has
been assigned in the system.
• All access codes listed are standard; some may vary based on system assignment.
• Access to many features is based on system assignments. Not all features may be
available from your telephone.
• The telephone display provides useful call processing information such as trunk
access, recall indication, feature confirmation, etc.
DSS/BLF LEDS
Telephone Status
Attendant Message
Idle
In-Use
Hold
FWD All (DND)
2
3
DSS/BLF Status
Steady Green
Unlit
Steady Red
Steady Red
Flashing Red
1. DSS keys (Direct Station
Selection) or CO Keys
(Central Office Lines)
2. Status Indicators
3. Dedicated Feature Keys
ADD-ON CONSOLE LEDS
CO Line Status
Idle
Incoming Call
In-Use (by Attendant)
Other-Use
Held Call
Your Telephone
Other Telephone
LED Indication
Unlit
Rapid Flashing Red
Steady Green
Steady Red
Slow Flashing Green
Slow Flashing Red