Conference Bridge Setup - NEC Electra Elite DSS User Manual

C
o n f e r e n c e B r i d g e S e t u p
Before using the Multiline Conference Bridge feature, passwords must be assigned.
It should be noted that the supervisor should perform these procedures.
SETTING SUPERVISOR PASSWORD
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the default Supervisor
Password (0000#).
Follow the voice prompt and enter the setting verification mode. Then enter
setting change mode.
Follow the voice prompt to change Supervisor Password (4-8 digits).
SETTING CONFERENCE 1 AND/OR CONFERENCE 2 PASSWORDS
Set the Supervisor Password, if necessary.
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the Supervisor Password
and #.
Skip the steps by pressing * until the Conference Setup mode is available for
conference 1 or conference 2.
Follow the voice prompt and set the conference 1 or the conference 2
password (4-8 digits).
RECORD CUSTOMIZED GREETING
Set the Supervisor Password, if necessary.
Call a Conference Bridge extension.
When the Conference Bridge extension answers, dial the Supervisor Password
and #.
Press * to skip the setting verification mode.
Press # to change system settings.
Skip the steps until Customized Greeting option is played.
Follow the voice prompt and record a new Customized Greeting.
9