Station / Individual Speed Dialing - Siemens Optiset E Standard Quick Reference Manual

Station / Individual Speed Dialing

This feature lets you assign frequently called external numbers
to a code (*0 through *9). You can then dial this digit code
instead of the entire telephone number. The Hicom 150 E CS
allows a dialing sequence of up to 25 characters to be assigned
to each digit code.
Note: For the feature described here, this procedure uses a
Speed Dial key that is programmed by your system
administrator.
To set up a station speed dial code
1. Dial * 92.
2. Dial a speed dial index code (*0 through *9) and select
Change?.
3. Enter the dialing sequence that the code will represent. You
may be required to include an access code for an external
line.
4. Select Save? or to program a different speed dial code, scroll
to Next? and select it.
5. When you are finished, scroll to and select Exit?.
To dial using a station speed dial code
To use the station speed dial feature, use the OptiGuide Display
to follow these steps:
1. When your telephone is idle, press the Speed Dial key
or dial * 7.
2. Dial the station speed dialing index code.
Refer to "Feature Access Codes" on page 39 for information on
accessing features through special access codes.
36 Optiset E QRG