wsm 05-E2B SERIES Workshop Manual page 87

05-E2B, 05-E2BG, WSM
Gear Case
1. Remove the gear case.
(When reassembling)
• Grease thinly to the oil seal, and install it, ensuring the lip does
not come off.
• Measure (L) when the gear case mounting bolt is inserted in the
gear case bolt hole and judge the installation position of the
mounting bolt when you do not understand the installation
position of the mounting bolt.
A : L = 18 mm (0.71 in.) (Pipe Pin Position)
B : L = 13 mm (0.51 in.) (Water Pipe Mounting)
C : L = 10 mm (0.39 in.)
D : Nut
(1) Gear Case
S-33
DIESEL ENGINE
W1030917
KiSC issued 06, 2011 A