wsm 05-E2B SERIES Workshop Manual page 47

05-E2B, 05-E2BG, WSM
Crankshaft Bearing 1 Replacing Tool
Application: Use to press out and press fit the crankshaft bearing 1.
[Press Out]
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 10 mm (0.39 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 51.2 to 51.4 mm dia. (2.0157 to 2.0236 in. dia.)
H 47.3 to 47.5 mm dia. (1.862 to 1.870 in. dia.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
[Press Fit]
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 10 mm (0.39 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.68 in. dia.)
H 47.3 to 47.5 mm dia. (1.862 to 1.870 in. dia.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
Governor Gear Holder Bushing Replacing Tool
Application: Use to press out and to press fit the governor gear
holder bushing.
A C1 : Chamfer 1.0 mm (0.039 in.)
B 73.9 to 74.0 mm dia. (29.09 to 29.13 in. dia.)
C 69.8 to 69.9 mm (2.748 to 2.751 in. dia.)
D 30 mm dia. (1.181 in. dia.)
E C2 : Chamfer 2.0 mm (0.079 in.)
F 18 mm (0.7 in.)
G 150 mm (5.9 in.)
H 188 mm (7.4 in.)
G-31
G GENERAL
W10261390
W1023337
KiSC issued 06, 2011 A