wsm 05-E2B SERIES Workshop Manual page 28

05-E2B, 05-E2BG, WSM
Fan Belt Damage and Wear
1. Check the fan belt for damage.
2. If the fan belt is damaged, replace it.
3. Check if the fan belt is worn and sunk in the pulley groove.
4. If the fan belt is nearly worn out and deeply sunk in the pulley
groove, replace it.
(A) Good
Checking Battery Electrolyte Level
1. Check the battery electrolyte level.
2. If the level is below than lower level line (2), and the distilled water
to pour level of each cell.
(1) Upper Level Line
G-12
G GENERAL
(B) Bad
W1209480
(2) Lower Level Line
W1047154
KiSC issued 06, 2011 A