General Information; Models Covered; Equipment Function; Necessary Documents - AEC AD Series Operation And Installation Manual

General Information

1-1

Models Covered

1-2

Equipment Function

1-3

Necessary Documents

AD Series Dehumidifying Dryers
This manual provides instructions for installing and operating AEC
AD15, AD30, and AD60 dehumidifying dryers.
designation represents air flow capacity. AD15 models have a 15
cfm air flow capacity, AD30 models have a 30 cfm air flow
capacity, and AD60 models have a 60 cfm capacity.
AEC dehumidifying mini dryers are designed to generate heated,
dehumidified air at carefully controlled temperatures for use in
plastic drying systems. Drying systems are sized to meet the
specific requirements stated by the purchaser at the time of
purchase.
Moisture removal from hygroscopic (moisture attracting) plastic
pellets is an essential step in the manufacture of high-quality
plastic products.
AEC dehumidifying dryers are used to generate very low dew
point air heated to a controlled temperature for drying plastic
pellets and regrind.
The documents listed below are necessary for the operation, in-
stallation, and maintenance of AEC AD15 through AD60 dryers.
Additional copies are available from AEC, Inc.
Familiarize the appropriate personnel with these documents:
This manual.
The schematic and assembly drawings included in the customer
information packet.
The Customer Parts List included in the information packet.
Operation and installation manuals for any optional controls or
auxiliary equipment in the drying system.
1
The number
Page 9