5-4 Identifying Temperature Controller Keys
Mode Key
Down Key
Up Key
5-5
Setting the Process Air Temperature
AD Series Dehumidifying Dryers
Press the
Mode key to shift the display to the next set of
parameters. The menu screen displays.
Press the
Down arrow key to lower the process air set point
temperature. During setup, it lets you decrease the value of the
parameter displayed on the set point LED readout.
Press the
Up arrow key to raise the process air set point
temperature. During setup, it lets you increase the value of the
parameter displayed on the set point LED readout.
When setting the process air temperature, consult with the resin
manufacture for the recommended drying temperature.
To change the process air temperature set point with the dryer
running:
Press
to raise the set point to the temperature you want.
Press
to lower the set point to the temperature you want.
Page 35