Returned Material Policy - AEC AD Series Operation And Installation Manual

12-2 Returned Material Policy

12-2-1 Credit Returns
1.
2.
3.
4.
5.
6.
12-2-2 Warranty Returns
1.
2.
3.
4.
5.
AD Series Dehumidifying Dryers
Prior to the return of any material authorization must be given by AEC,
INC. A RMA number will be assigned for the equipment to be returned.
Reason for requesting the return must be given.
ALL returned material purchased from AEC, INC. returned is subject to
15% ($75.00 minimum) restocking charge.
ALL returns are to be shipped prepaid.
The invoice number and date or purchase order number and date must
be supplied.
No credit will be issued for material that is not within the manufacturer's
warranty period and/or in new and unused condition, suitable for resale.
Prior to the return of any material, authorization must be given by AEC,
INC. A RMA number will be assigned for the equipment to be returned.
Reason for requesting the return must be given.
All returns are to be shipped prepaid.
The invoice number and date or purchase order number and date must
be supplied.
After inspecting the material, a replacement or credit will be given, at
AEC's discretion. If the item is found to be defective in materials or
workmanship, and it was manufactured by AEC, INC., purchased
components are covered under their specific warranty terms.
Page 71