Table of Contents
Advertisement
Setting List for Process Temperature Controller (E5CN), Part No. A0555757
Mode
Parameter
Operation Run/Stop
Operation Alarm value 1
Mode
Parameter
Adjustment AT execute/cancel
Adjustment Temperature input shift -199.9 to 999.9
Adjustment Proportional Band
Adjustment Integral Time
Adjustment Derivative Time
5-7
Process Air Dew Point Display
Optional
Page 38
Press
and
parameter or turn that function On or Off.
Press
Level Key once to return to the Process Temperature
Setting.
Figure 8
Setting range
Run/Stop
-1999 to 9999
Setting range
ON, OFF
0.1 to 999.9
0 to 3999
0 to 3999
The Process Air Dew Point meter indicates the current process air
delivery moisture content. Standard AEC dryers use a
microprocessor-based controller for displaying dew point air
temperature. The controller is a modular, self-contained unit
removable from the mounting housing. All parameters are factory
set and adjusted; normally, no field adjustment to the internal
controls are necessary.
to set the higher or lower the values of a
Default AEC setting
Default AEC setting
OFF
AD Series Dehumidifying Dryers
Run
-
0
25
?
0.0
-
8.0
?
233
?
40
?
Hide quick links:
Advertisement
Table of Contents
