Suggested Lift Rigging For Ad Dryers (Cart Mount) - AEC AD Series Operation And Installation Manual

CAUTION!
• If you are mounting an AD machine-mount dryer with a magnet
or transition adaptor on the machine throat, you must provide
additional support to hold the dryer securely on the machine.
• Be aware that off-center static and dynamic hopper loading can
occur with machine vibration. Again, provide additional support
to hold the dryer securely on the machine.
• For AD60 dryer units, you must provide additional support to
stabilize these units and to protect personnel when installing
on machine throats.
• Use caution and observe safety rules when lifting and placing
your dryer!

Suggested Lift Rigging for AD Dryers (Cart Mount)

Important!
Do not use a hoist to move or rig your AD Dryer when it is mounted
on a cart! Moving the Dryer with a hoist will cause it to become
unstable and may cause damage to the Dryer and/or injury to
personnel!
Item Quantity
1 1
2 2
3 1
4 1
Page 26
Figure 4A
DO NOT
USE
ON
PROCESS
TEMPERATURE DEW POINT
CONTROL POWER
ALARM HORN
ON OFF
ALARM ALARM Silencer
TRUCK
Description
Adjustable alloy chain sling
Existing hopper lifting bracket
Drop forged steel eye nut
Chain connector
USE
FORK
LIFT
Vendor
McMaster-Carr
—
McMaster-Carr
McMaster-Carr
AD Series Dehumidifying Dryers
Vendor part no.
33665T32
—
3019T15
3712T23