Setting The High Dew Point Alarm; Restoring The E5Ck Dew Point Meter To Factory Setup; Typical Dew Point Display Monitor - AEC AD Series Operation And Installation Manual

5-8

Setting the High Dew Point Alarm

5-9 Restoring the E5CK Dew Point Meter to Factory
Setup
AD Series Dehumidifying Dryers
Figure 9

Typical Dew Point Display Monitor

S V
OUT1
OUT2 MANU STOP RMT
AT
OMRON
(Note: The only functional buttons on this contoller
are the up and down keys.)
The high dew point alarm setting is changed by pressing the up and
down keys to input the alarm value. The factory setting for Alarm
AL-1
( )
Value 1
If the preset parameters on the controller have been tampered with
and it no longer functions properly, call the Service Department at
AEC. This controller is not meant to be modified.
Note: The dew point alarm monitors and indicates
a deviation from the set point.
PV
-40
-10
AT SUB1
E5CK
is -10°F (-23°C).
Page 39