NEC DSX User Manual page 19

(The following steps apply if you have turned notification on for the first time or have pushed Destination.)
Part B: Select the Destination
1. Select the notification destination:
– If your system does not allow Cascading Message Notification, you will only see Destination1.
When you see Number on the second display line, do one of the following:
2.
Enable
– Push to enable the notification destination.
Disable
– Push to disable the notification destination.
– Push Change to edit the notification number.
(The following steps apply if you pushed
Part C: Enter the Destination Information
1. Dial the notification start hour.
– The entry is 2 digits (
2. Dial the notification stop hour.
– The entry is 2 digits (
3. Select the notification type:
Number
– Push to have voice mail notify you at your cell phone or home office.
Pager
– Push to have voice mail notify you on your digital pager.
4. Dial your pager, cell phone, or home office number + Push OK.
– For help with the number you should dial, see your System Administrator.
5. Select one of the following Security Code options:
Required
– Push
Not Required
– Push
6. Enter the number (01-99) of Busy Attempts.
– This is the maximum number of times (normally 5) voice mail will try a busy number.
7. Enter the number (01-99) of Ring No Answer attempts.
– This is the maximum number of times (normally 5) voice mail will try an unanswered destination.
You automatically go back to Part B Step 2 . Do one of the following:
8.
– Enable, disable, or change the notification entry.
– Push Back repeatedly to back up to previous steps.
Cascading Message Notification
Destination 1
Change to edit the notification entry.)
AM or PM.
- ) + Push
01 12
AM or PM.
- ) + Push
01 12
to have your Security Code required for this destination.
if your Security Code is not required for this destination.
Destination 5.
through
19