Channels - Hammond A-405SP Owner's Manual

7. TEMPORARY DUMP
Th is is for sending the Memory Dump.
If you touch [4] SEND in this page, this organ sends the whole TEMPORARY (= the
current setting information) data from the MIDI OUT jack. Th is is for recording the
TEMPORARY data to a external MIDI Sequencer.
8. ALL DUMP
Th is is for sending the Memory Dump too.
If you touch [4] SEND in this page, this organ sends ALL data from the MIDI OUT
jack. Th is is for recording the ALL data to a external MIDI Sequencer.

CHANNELS

Th ese are for setting which MIDI Channel you use to send / receive each keyboard.
You can choose 1 - 16 and OF. If OF, nothing is sent / received.
9. SWELL
Th is is for setting the MIDI channel to send and receive the playing information of the
Swell manual.
10. GREAT
Th is is for setting the MIDI channel to send and receive the playing information of the
Great manual.
11. PEDAL
Th is is for setting the MIDI channel to send and receive the playing information of the
Pedal Board.
12. EXTERNAL ZONE
Th is is for switching ON/OFF the total MIDI transmission to the the External Zone.
13. CONTROL
Th is is for setting the MIDI channel to send and receive the operating information of
buttons, knobs and the Expression Pedal.
14. LESLIE
Th is is for setting the MIDI channel to send and receive the Leslie parameter informa-
tion.
To avoid confusion of the MIDI signals, be careful not to duplicate each MIDI
channel, including the External Zone (P. 90 #4).
NOTE: All the parameters in these modes are not recorded into the Combination Presets. This is
common with all Presets.
8
CONTENT OF TEMPORARY DUMP
The PRESET Parameters, GLOBAL Parameters
and SYSTEM Parameters of TEMPORARY (=
current status) are sent and received.
The content of each Combination Preset and
that of each Leslie Cabinet is not sent or re-
ceived.
To save these, you must use the ALL DUMP or
CF Card.
93
MIDI