Switch Off Mode; External Leslie Speaker - Hammond A-405SP Owner's Manual

Table of Contents

SWITCH OFF MODE

20. OFF MODE (P)

Th is parameter sets the action when [LESLIE ON] button is OFF.

When BRAKE is selected, the speed gradually slows down and stops. When if

THROUGH is selected, the Leslie eﬀ ect is by-passed and the voice comes out of the

stationary channel.

NOTE: You may not be able to control the Brake or Through on some Leslie models.

NOTE: This parameter is the Preset Parameter, and it is recorded to each Combination Pre-

set.

21. LESLIE CHANNEL (S)

Th e Channel is set for the Leslie Speaker connected to the 11-pin terminal.

1ch:

Use this setting when connecting to a 122XB, 3300 (not expanded), or other single-chan-

nel Leslie cabinet. The Drawbar and Percussion sounds will be heard through the single

Rotary channel.

3ch:

Use this setting when connecting to an 2101/mk2, 3300/3300W (expanded with station-

ary speakers), or other 3-channel Leslie cabinet. The Drawbar and Percussion sounds will

be heard through the Rotary channel, the Extra Voice LEFT signal will come through the

Stationary MAIN channel and the Extra Voice RIGHT signal will be fed through the Station-

ary AUX channel.

NOTE: This parameter is the System Parameter. It is recorded when the value is set.

Also, it is common at each Combination Preset, and it is not saved into the song.

Owner's Manual

Table of Contents