Using Rhythm; Using Buttons - Hammond A-405SP Owner's Manual

104

Using Rhythm

By using the exclusive (optional) rhythm data, the Sequencer func-
tions as a simple rhythm player. You may enjoy your organ perfor-
mance to the back ground of the rhythm you select.
1
Check that the CF Card is correctly inserted.
2
Come to the SONG mode.
3
SWELL
PRESET
1
PAGE/ PARAM.
SONG
MENU
Press the [PAGE/SONG] button and select the Rhythm fi le
you want to playback. ("RY" for the Rhythm fi le appears on the
top right of the screen.)
4
SWELL
PRESET
1
PAGE/ PARAM.
SONG
MENU
Press the [1] LOD button. Th e Rhythm fi le will loaded.
PEDAL GREAT
TRANSPOSE
2 3 4
VALUE
JUMP PLAY
PEDAL GREAT
TRANSPOSE
2 3 4
VALUE
JUMP PLAY
Owner's Manual
5
SWELL
1
PAGE/ PARAM.
SONG
Volume
MENU
SEQUENCER
Intro/Ending
Fill In
Start/Stop

USING BUTTONS

If the Rhythm fi le is in the memory, the Sequencer buttons
function as follows:
[ ] Start/Stop
Starts/Stops the Rhythm.
Th e light above the button blinks to the tempo, while the
rhythm is running.
[ ] Fill In
Fill-in turns on in the measure where this button was pressed.
Th e pattern immediately after the rhythm starts is the basic
one, but "variation" and "basic" change in turn every time the
Fill-in turns on.
If you press and turn on this button while the rhythm is off ,
the normal pattern starts after Fill-in is played, when you start
the rhythm again.
[ ] Intro/Ending
If you press and turn on this button while the rhythm is off , the
normal pattern starts after the Intro is played, when you start
the rhythm again. If you press this button while the rhythm is
running, the rhythm stops after the Ending is played.
[PARAM ], [PARAM ] Volume
Changes the Rhythm volume.
[VALUE -], [VALUE +] Tempo
Changes the Rhythm tempo.
NOTE: You can not record the song to the Sequencer, if you make it
using the Rhythm fi le.
NOTE: You can control Start/Stop and Fill-in with the foot-switch. (P.
63)
PEDAL GREAT
PRESET TRANSPOSE
2 3 4
VALUE
Tempo
JUMP PLAY