Play With The Controllers; Pitch Bend / Modulation Wheel; Expression Pedal; Foot Switch - Hammond A-405SP Owner's Manual

Table of Contents

Using the performance controllers will add expression to your playing. On this page you will learn how to

use these controllers. Th e controllers exclusive to the Hammond are covered on the next page.

PITCH BEND

PLAY WITH THE CONTROLLERS

MODULATION







Th e [PITCH BEND] wheel is used to slide the pitch up or down

while playing.

Th e frequency goes up when you move it back, and it goes down

when you move it forward.

When you release your hand from the [PITCH BEND] wheel, it

returns automatically to the center position.

NOTE: You can adjust the range of the pitch bend. (P. 62)

Th e [MODULATION] wheel on the right is not usually used with

the Hammond Organ Drawbar voices. It is used when you modu-

late Extra Voice or External Zones.

Th e organ's volume is controlled by using the Expression Pedal.

As you depress the pedal forward, the volume rises, and lowers

when you return it.

NOTE: You can adjust the range of the expression pedal. (P. 63)

Th e Foot Switch, on the left side of the Expression Pedal can be

programmed for various functions. "Leslie Slow / Fast - Alternate"

is the factory default. Every time you depress the Foot Switch, the

Leslie changes mode.

NOTE: You can change the Foot Switch assignment. (P. 64)

NOTE: You can add external Foot Switch or Leslie Mode switch. (P. 64)

Turn On And Play

Table of Contents