Remote Menu - Sony LMD-2451MT Instructions For Use Manual

Submenu Setting
HOROPTER Changes display formats in monitoring
CHECK left/right input signals. This helps to
differentiate between left and right
signals.
• NORMAL: Displays video signals.
• BLUE: Displays video signals as RGB
• RED: Displays video signals as RGB
• MONO: Displays video signals as
• BLACK: Displays black signals. (No
FLIP H Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
• OFF: Deactivates the reversing
• LEFT: Horizontally reverses left
• RIGHT: Horizontally reverses right
PAYLOAD ID Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-250TG.
Going out of the 3D SETTING menu
renews channel assign information.
• -: Payload ID is not superimposed on
• x: Channel assign information is
• LEFT: Channel assign information is
• RIGHT: Channel assign information
Payload ID is only available when
DUAL is selected in 3D SIGNAL
FORMAT.
2D/3D DISPLAY Sets the on-screen indication of the
display mode currently viewed.
Selecting AUTO or ON displays "2D" or
"3D" at the top center of the screen
according to the display mode selected.
• AUTO: "2D" or "3D" is displayed for
• ON: "2D" or "3D" is always
• OFF: The display is hidden.

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N N E C T I O N :
38
Adjustment Using the Menus
blue color component.
red color component.
grayscale image.
video signals)
function.
signal.
signal.
signals.
detected as Link-3 or Link-4.
detected as Link-1.
is detected as Link-2.
about five seconds after switching
between the 2D and 3D display
mode.
displayed.
xxxxxxx
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• MIRROR IMAGE
• 2D/3D SELECT
• CHECKERBOARD
• L/R SWITCH
• HOROPTER CHECK
• DISPARITY SIM.
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 43.
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• RS-232C: The monitor is
• ETHERNET: The monitor is
not function.
controlled by the command
of RS-232C.
controlled by the command
of Ethernet.