Table of Contents
Advertisement
For the DVI/HD15 input
* The 1/3 menu cannot be adjusted.
USER CONTROL 2/3
S U B C O N T R O L
C O N T R A S T :
x
B R I G H T N E S S :
x
C H R O M A :
x
P H A S E :
x
A P E R T U R E :
x
x
B A C K L I G H T :
USER CONTROL 3/3
PICTURE CONTROL
S I Z E H :
xx
S I Z E V :
xx
xx
S H I F T H :
S H I F T V :
xx
D O T P H A S E :
xx
P I T C H :
xx
R E S O L U T I O N :
xxx
R E S E T
Submenu
Setting
SUB CONTROL
Adjusts finely the adjustment range
of the button on the front panel for
CONTRAST, BRIGHTNESS,
CHROMA and PHASE.
• CONTRAST: Adjusts the picture
contrast.
• BRIGHTNESS: Adjusts the
picture brightness.
• CHROMA: Adjusts color
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
• PHASE: Adjusts color tones.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
• APERTURE: Adjusts the picture
sharpness.
The higher the setting, the
sharper the picture. The
lower the setting, the softer
the picture.
• BACKLIGHT: Adjusts the
backlight. When the setting
is changed, the brightness of
the backlight is changed.
Submenu
Setting
PICTURE CONTROL
Adjusts to monitor the picture more
clearly.
• SIZE H: Adjusts the horizontal
size of the picture. The
higher the setting, the larger
the horizontal size of the
picture. The lower the
setting, the smaller the
horizontal size of the
picture.
• SIZE V: Adjusts the vertical size
of the picture. The higher
the setting, the larger the
vertical size of the picture.
The lower the setting, the
smaller the vertical size of
the picture.
• SHIFT H: Adjusts the position of
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
• SHIFT V: Adjusts the position of
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
• DOT PHASE: Adjusts the dot
phase. Adjust the picture
further for a finer picture
after APA (page 35) is
adjusted.
• PITCH: Adjusts the horizontal
size of the picture with the
left side of the picture fixed.
The higher the setting, the
larger the width of the
picture. The lower the
setting, the narrower the
width of the picture.
• RESOLUTION: Sets when the
computer signal is input and
it is difficult to understand
the signal type such as
XGA/60 or WXGA/60
•XGA: Displayed as XGA
signal.
•WXGA: Displayed as
WXGA signal.
• RESET: Resets the value of
SIZE H, SIZE V, SHIFT H,
SHIFT V, DOT PHASE and
PITCH to the factory preset
value.
Page 31
Adjustment Using the Menus
- Quick Links:
- On Installation
Hide quick links:
Advertisement
Table of Contents
