Extron electronics CrossPoint 450 Plus Series User Manual page 74

Operation, cont'd
4.
Press the Esc button to increase
the RGB interval that is applied to
switches to the selected output by
a half second per button push.
ESC
Figure 3-40 — Adjust the RGB delay interval
5.
Figure 3-41 — Deselect RGB Delay mode
3-30 CrossPoint / MAV Matrix Switchers • Operation
Press and release the Esc (
delay by a half second.
Press and release the Esc (
whole second. Note the input button indication changes that occur each time
the Esc ( > ) button is pressed and released.
Figure 3-40 show the result of pressing the Esc (
Input buttons 1 through 10 display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the lit input buttons display 5.0 seconds of RGB interval.
0.5
1
ESC ESC
17 18 19 20 21 22 23 24 25 26
Press and release the RGBHV button (figure 3-41).
Press the RGBHV button
to exit RGB delay mode.
The RGBHV button stops
blinking and returns to unlit
or background illumination.
All input buttons and output buttons
return to unlit or background illumination.
> ) button once (figure 3-40) to increase the RGB
> ) button twice more to increase the RGB delay by a
>
) button a total of 3 times.
1.0 1.5 2.0 2.5 3.0
2 3 4 5 6
I / O
The Audio button lights red.
RGBHV AUDIO
3.5 4.0 4.5 5.0
I
7 8 9 10 16
N
P
U
T
32
S