Change The Input Gain And Attenuation (Audio Models) - Extron electronics CrossPoint 450 Plus Series User Manual

HTML Operation, cont'd

Change the input gain and attenuation (audio models)

Users can set each input's level of audio gain or attenuation (-18 dB to +24 dB) from
the RGB and Audio Settings page. Audio levels can be adjusted so there are no
noticeable volume differences between sources.
Change an input's audio level setting as follows:
1.
Figure 6-12 — Input selection drop box
2.
3.
4.
Figure 6-13 — Gain drop box
5.
6.
6-14 CrossPoint / MAV Matrix Switchers • HTML Operation
Click the Input drop box. A drop down scroll box appears (figure 6-12).
Click and drag the slider or click on the scroll up
button until the desired input is visible.
Click the desired input.
Click the Input Audio Level (dB) drop box. A drop down scroll box appears
(figure 6-13).
Click and drag the slider or click on the scroll up
button until the desired input is visible.
Click the desired gain or attenuation value.
button or scroll down
button or scroll down