®
I N T E L L I T R A X
A U T O S C A N N I N G
Connecting the Optional eXact Handheld Instrument
Operational hazard exists if an AC adapter other than X-Rite SE30-177 is used.
AC Adapter Ratings, Input: 100-240V 50-60 Hz, Output: 12VDC @ 2.5A
1. Turn the docking station over and feed the small plug from the power supply through
the strain relief (1) in the middle of the station.
2. Plug the small plug into the input connector (2). The power supply cable can be feed
out any side of the docking station at the bottom.
3. Plug the detachable line cord in the power supply, and then plug the line cord into an
easily accessible, grounded wall receptacle.
4. Position the instrument on the docking station to charge.
5. Plug the square end of the USB cable into the back of the instrument (3).
6. Plug the USB cable into an available port on your computer.
NOTE: If available, the instrument uses Bluetooth
wirelessly with your computer. Data from the instrument can be transmitted to the
application. Connecting a USB cable to the instrument disables the wireless connection.
Refer to the instrument manual for additional information on setting up the wireless
function.
8
S Y S T E M
(2)
(1)
(3)
technology and can communicate
®