Unpacking And Inspection; System Connections - X-Rite Set Up And Operation Manual

eXact Handheld Spectrophotometer
(Optional Accessory)
The optional hand-held spectrophotometer supplied with
your system allows you to take spot check measurements.
NOTE: It is recommended that you read the Hand-held
Instrument Manual supplied with your system before using
the hand-held instrument.

Unpacking and Inspection

After removing the instrument from the shipping carton, inspect it for damage. If any
damage has occurred during shipping, immediately contact the transportation company. Do
not proceed with installation until the carrier's agent has inspected the damage.
Your instrument was packaged in a specially designed carton to assure against damage. If
shipment is necessary, the instrument should be packaged in the original carton along with
all the accessories. If the original carton is not available, contact X-Rite to have a
replacement shipped to you.
Packaging Contents:
• IntelliTrax Instrument
• Vacuum Pump
• eXact Handheld Instrument (optional accessory)
• Cabling
• Switching Power Supplies with line cords
• Getting Connected Sheet
• Documentation Package (software CD, manual, registration form, cert of cal)

System Connections

The IntelliTrax system requires a few basic connections before operating. Connection
procedures for the individual components are covered on the following pages.
I N T E L L I T R A X
Docking Station
®
A U T O S C A N N I N G
Power Input
Vacuum Pump
Not used
Ethernet
Vacuum Pump Hose
S Y S T E M
5