Calibration; Calibrating The Intellitrax System - X-Rite Set Up And Operation Manual

®
I N T E L L I T R A X A U T O S C A N N I N G

Calibration

Regular calibration of the IntelliTrax system and hand-held instrument is important for
maintaining accurate and consistent measurement data. Normally, the software application
prompts you for a calibration when it's required. Calibration of either the IntelliTrax system
or hand-held instrument can also be manually invoked whenever desired.

Calibrating the IntelliTrax System

Calibrating the scanning instrument is virtually automatic. A white calibration disk is a
permanent part of the track assembly, located near the docking station. A retractable cover
protects the calibration disk when the scanning head is away from the docking station. The
scanning head automatically calibrates to the white disk when required, or when calibration
is initiated in the application.
IMPORTANT: The white calibration disk should be cleaned periodically to maintain
calibration accuracy. Refer to Cleaning the White Calibration Disk in the Appendices for the
procedure.
12
S Y S T E M
Calibration Disk Cover