Connecting The Vlb - X-Rite Pantone Virtual Light Booth User Manual

V i r t u a l L i g h t B o o t h

Connecting the VLB

Plug one end of the Ethernet Crossover cable into the Ethernet port on your computer. Plug the
1.
other end of the cable into the VLB.
Connect the AC cord to the VLB and then an easily accessible outlet.
2.
Make sure AC cord is connected to a Dedicated Line – AC power source with a minimum 15 Amp
power service.
Discontinue use if AC cord is damaged.
8
AC cord connection
Ethernet cable connection