Unpack Your System; Unpacking The Shipping Boxes - EMC VNX5300 Block Installation Manual

Unpack your system

Unpacking the shipping boxes

You will have received your system either fully assembled and cabled in an EMC cabinet, or in
shipping boxes to be unpacked and installed into your own cabinet.
If your system was shipped fully assembled and cabled in an EMC cabinet:
1. Follow the unpacking instructions on the outside of the box.
2. Go directly to
If your system was shipped in separate boxes and needs to be assembled in your own cabinet:
1. Verify that you have received all of the system components, including cables, bezels, rails,
and screws.
Table 3 Shipping contents
❏
❏
❏
❏
For damaged or missing components, notify your Sales associate immediately for replacements.
2. Start the unpacking and assembly process with
page 11.
Note: Ensure that you have the latest version of the install guide and any other associated
documentation. To download the most recent version of the installation guide, go to
https://mydocs.emc.com/VNX/
"Cable your system" on page 17
Table 3 below lists the shipping contents.
Components
Standby power supply (SPS)
Disk Processor Enclosure (DPE)
Cable label kit (for customer cabinet)
Documentation
and select Install VNX.
of this installation guide to verify the cabling.
Accessories
• Mounting screws
• Bezel
• Bezel brackets
• Management cable
• Power cable
• Rail kit
• Mounting screws
• Bezel with key
• Power cables
• Rail kit
Cable labels for SAS cables to DAEs
Documentation kit, including:
• this installation guide
• Environmental Compliance information
and notices
• Right-to-Use (RTU) notices, as appropriate
for the system
"Assemble components in your cabinet" on
Unpack your system 9