LifeShield home security system Setup Manual page 8

5
Add Additional Keychain Remote(s)
NOTE: Your Keychain Remote is ready to go and preprogrammed for a master User.
If you have more than one Remote, you must create new
User Codes before those keychains can be added. The
LifeShield system can support up to 8 Users—1 master
User, who is able to change System Settings—and 7
Normal Users, who are only able to Arm and Disarm
the system.
*FOR MULTIPLE KEYCHAINS, YOU MUST CREATE A
UNIqUE USER FOR EACH KEYCHAIN
User Codes can easily be added, changed or deleted
from the system Console. Here are the steps to add a
pregrogrammed Keychain Remote:
Press Menu on Console
A
Scroll to Security Setup on the screen, press Select
B
Enter master Code*
C
Scroll to Users
D
Select <Add New>
E
It defaults to User 1, use the delete button to erase default
F
username.
Enter desired name using keypad numbers, press OK.
G
Create a unique 4 digit arming code for this user, press OK
H
System will ask you to confirm <New User> add, press OK
I
*NOTE - IF YOU HAVE ADDITIONAL USERS TO CREATE
SELECT <ADD NEW> AND REPEAT.
If you are ready to add additional keychain
remotes please continue with steps below:
Press the Button under Back (which displays on the Screen)
J
Scroll down to Keychains
K
Select <Add New>
L
Press all 3 Keychain buttons.
M
Select user to assign the Keychain to
N
*Note: Wherever Master Code is shoWN P
7
Menu
A
lease use your uNique Master Code FouNd iN the FroNt Cover oF this book
Ready To Arm
Menu
Thu 2/8 11:48a
PHNBK MENU CONNCT
Ready To Arm
Thu 2/8 11:48a
PHNBK MENU CONNCT WEATHR
Scroll
Buttons
WEATHR ALERTS
Keychain
Remote
Scroll
Buttons
ALERTS
B