Mytee Speedster 1000DX-200 Instructions Manual page 10

1001DX & 1001DX - 200 SPEEDSTER
1001DX & 1001DX-200 SPEEDSTER
HOSE CONNECTIONS
Attach one end of a solution hose to a wand or other tool, the other
end to the Speedster's® front quick disconnect. Attach one end of
a vacuum hose to the tool, the other end to the Speedster's® Cuff-
Lynx™ vacuum hose port.
1001DX & 1001DX-200 SPEEDSTER
FILL SOLUTION TANK
Lift lid and manually fill the tank.
VAC/SOL 1001DX & 1001DX-200 SPEEDSTER
®
"On" switches are located on the plate in front of the machine. To
use vacuums, turn on Vac 1 and Vac 2 switches. To use pump,
turn on Pump switch. To activate heat, turn on Heater switch.
Heater 1 for 1000 watts of heat. Heater 2 for 2000 watts of heat.
®
Check and clean solution tank filter daily by twisting off, rinsing
with clean water and replacing.
10
Vac 1 Vac 2 Heater 1
Pump Heater 2
1001DX & 1001DX-200 SPEEDSTER
FILTER MAINTENANCE
INTAKE
FILTER
SWITCHES
®
®