Nortrac XT20 Owner's Manual page 84

Part
NOTICE: Before using a supporting farm implement, the owner/operator should read the machines
"operation and maintenance manual" carefully and become familiar with the construction, performance and
method of operation to avoid machine damage and personal injury caused by accident.
IMPORTANT NOTES:
1. Before purchasing farm machines and implements, select a good match with your machine or
consult a reputable dealer. Understand your operational conditions (soil resistance, agricultural
requirements, etc.) of the areas where you will be working and referring to this list.
2. Determine the main technical parameters of the farm machines and implements such as models
according to the operational conditions (soil resistance, agricultural requirements, etc.) of the areas
where you will working and refer to the advisories in order to get the appropriate match. Improper
matching will make the new machinery ineffective and, possibly, dangerous.
3. Working efficiency can be dependent on the implement, the performance of which may vary
with operational conditions (soil resistance, agricultural requirements, etc.). Therefore, you
should determine working speed and width, etc. and make your purchase accordingly.
Specification
75×2.65G
80×3.55G
85×3.55G
170×3.55G
175×3.55G
Distributed by Northern Tool + Equipment Co., Inc.
Burnsville, MN 55306-6936
Made in China
Installation Position
External end of half shaft
Driving bevel gear bearing
Drive shaft cap
Internal end of half shaft
78
Bearing cap
sleeve
Rear bearing
saddle
sleeve
Quantity
2
2
2
2
2
2