Appendixes; Tractors Fuels, Oils And Solutions - Nortrac XT20 Owner's Manual

10.1 Tractor Fuel, Oils and Solutions
Application
Locations of Oils
and Solutions
International
Fuel Tank
standard
International
Engine Sump
standard
Water radiator
Gearbox-rear
axle, hydraulic
International
lifter, and front
standard
drive axle
International
Steering fluid
standard
Oil Fittings/ International
zirks standard
Battery
IMPORTANT NOTES:
Hybrid use of oils of different brands and manufacturers can affect the service performance of the
machine. Their use is not recommended.
NOTE:
1. Never fill fuel into the fuel tank while the diesel engine is running, as doing so, could cause an accident.
2. When working in severe sunlight, the fuel tank should not be filled up, or the fuel may overflow as a
result of expansion. The overflowed fuel should be cleaned up immediately.

10. Appendixes

Table 10-1 Tractor Fuel Oils and Solutions
Fuel, Oils and Solutions
Adopt ASTM D-975 fuel. Under general air temperatures, use 2-D grade
fuel; when ambient temperatures are below 32 F, use 1-D grade fuel.
Engine sump, injection pump, and governor use viscosity grades compliant
with SAE viscosity classifications. Use all-season SAE 15W/40 multi-grade
oil. Quality class should comply with API CD grade standard.
Use a 50/50 blend of antifreeze and water.
Drive system and lifter, hydraulic steering, and central and final drives of
front drive axle can use MF1135 (Massey Ferguson), M2C 86A (Ford), or
J20A (John Deer) general-purpose oil.
Same as above.
Use a multipurpose grease.
Maintenance free
73