Nortrac XT20 Owner's Manual page 25

Horn Switch
Horn switches are located on both arms of the steering wheel.
Figure 2-15 Horn Switch
Ignition Switch
Put the key into the electric switch and turn it clockwise to the following
positions:
• Turn the key clockwise to ACC shift, which will turn on the auxiliary
electrical devices.
• Turn the key to ON shift and the control circuit will be activated.
• When the key is turned to H shift, the preheating device will be turned on.
• Once preheated, turn the key to ST shift to start the engine After the
engine is started release the key immediately, so that the key returns to the
"ON" position automatically.
To avoid burning out the starter, avoid turning the key to ST shift for more than 5 seconds.
Operation Description
Hazard Warning Switch
The hazard warning switch should be used in case of a tractor malfunction where the
tractor is stopped in a potentially dangerous area.
Figure 2-14 Hazard Warning Switch
Figure 2-16 ignition lock
19