Transportation - Nortrac XT20 Owner's Manual

Tractors
Table of Contents

Advertisement

If the tractor is displaced by self-drive, local traffic regulations should be strictly observed with at
least 180 feet of distance maintained between vehicles. If the tractor is being transported, the following
points should be satisfied:
1. A smooth, level spot should be selected for loading and unloading the tractor.
If available, a special unloading platform should be used.
3. Have one helper available for guiding and make sure the area is clear of all others.
4. After loading, the lift should be placed at the lowest position, the hand brake set, the reverse gear
engaged, the key taken out, and the master switch turned off.
The front and rear tires should be fixed in place with straps in an 8 pattern. Both front and rear tires
5.
should be blocked and the rear axle secured with straps.
6. The tractor should be pulled inside as far as possible and the rear view mirror may be taken down
when necessary
7. When tunnels and bridges are encountered, full attention must be paid to the load height, and
speed should be adjusted for road safety.
8. While unloading, the hand brake should be released first. The drive gear should then be engaged and
the tractor should be unloaded slowly and carefully.
Storage

6. Transportation

64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt25

Table of Contents