Nortrac XT20 Owner's Manual page 34

2.14.5 Use of multiway valve
•
Switch off the engine.
•
Put the lifter in lowering position.
•
Move the hydraulic output valve operation handle
forward and backward, in order to eliminate the
pressure in the hydraulic adapter seat.
•
Take out the sealing cover of the adapter seat and
clean the adapter.
•
Connect the spare male connector to the female
connector with the quick change coupler, and then
connect the oil inlet and outlet of the
double-action oil tank on the farm machine. The
multi-way valve has four quick change couplers,
with female connections (AB1 and AB2). The
control handle (C) controls the first hydraulic
output (AB1) and control handle D controls the
second hydraulic output (AB2).
IMPORTANT NOTES:
1 When a hydraulic output device is used, the connector seat should be covered with a seal cover to
avoid dust.
2 After the hydraulic output device is used, the operating handle should be set to the neutral position,
otherwise, the hydraulic system may overheat.
Operation Description
（Optional）
28
Figure 2-26 Multi-Way Valve (25XT)