Clutch Adjustment And Maintenance; Clutch Pedal Adjustment - Nortrac XT20 Owner's Manual

No. Maintenance Part
31 Front drive axle central drive
32 Front drive axle final drive

4.2 Clutch Pedal Adjustment

4.2.1 Clutch Adjustment
The adjustment method of the clutch pedal working stroke is as flollows:
Loosen the nut (1) (as shown in Frgure 4.2, unmarked dimension unit: mm), turn the stop screw (2) to
make the working stoke below the clutch rocker arm (3) 23-26mm and then lock the nut (1).
1. Lock nut 2. Stop screw
3. Release rocker arm
4. Pull rod front fork
5. Screw nut 6. Clutch pedal
7. Locknut 8. Interlock pull rod
Figure 4-2 Schematic drawing of
the operating system of the clutch
Maintenance Instruction
Operation Content
Replace the lubricating
oil
Replace the lubricating
oil
48
Number Maintenance Period
of Points
Per 1600 hours
1
Per 1600 hours
1