Troubleshooting:
Self-Diagnostic Test
Printer does not print.
Ensure the printer emulation is set to PS (if available) or Automatic.
NG is printed in the Self-diagnostic test.
Confirm that the NIC is installed correctly and turn the printer off
•
and on again.
Ensure the network cable is correctly connected.
•
Connect to a different network segment, rerun the test and see if
•
this fixes the problem.
EEPROM Check registers NG.
Confirm that the NIC is installed correctly and turn the printer off
•
and on again.
Initialize the NIC.
•
Troubleshooting: Self-Diagnostic Test • 208