Parallel Setup - Oki C9600dn Configuration Manual

Parallel Setup

Item
Parallel
Bi-Direction
ECP
Ack Width
Ack/Busy
Timing
I-Prime
Offline Receive
Value
Enable
Disable
Enable
Disable
Enable
Disable
Narrow
Medium
Wide
Ack in Busy
Ack while Busy
3 microseconds
50 microseconds
Disable
Enable
Disable
251
Description
Enables/Disables the Centronics
interface.
Enables/Disables the bi-directional
Centronics interface.
Enables/Disables the ECP mode.
Sets the ACK width for compatible
reception.
Narrow = 0.5µs
Medium = 1.0µs
Wide = 3.0µs
Sets the order to output the BUSY
signal and ACK signal for compatible
reception.
Sets the time to enable/disable the
I-PRIME signal.
Enables/disables a function that
maintains the receive-possible state
without changing an interface signal
even though an alarm occurs. When
this is set to Enable, the interface
keeps the receive-possible state even
when you press the Off-line operating
panel switch. The interface sends the
BUSY signal only when the reception
buffer is full or a service call occurs.
This menu is not displayed on a Non-
PS machine.