Settings
Item
Reset settings
Save settings
Calibration Menu
Item
Auto density mode
Adjust density
Adjust registration
Value
Description
Execute
Resets EEPROM of the CU. Returns a
user's menu setup to the factory default
state.
Execute
Saves the current menu settings.
Value or
Submenu
Entrty
Value
ON
–
OFF
Execute
–
Execute
–
247
Description
Sets whether density
adjustment and TRC
compensation is automatically
performed.
ON: density adjustment is
automatically run under the
printer specified conditions and
reflected in TRC compensation.
OFF: the printer does not carry
out density adjustment
automatically.
When Execute is selected, the
printer carries out density
compensation immediately and
reflects it in TRC compensation.
Density adjustment must be
carried out when the printer is
idling.
When Execute is selected, the
printer carries out registration
adjustment automatically.
Registration adjustment must
be carried out when the printer
is idling.