Ethertalk - Oki C9600dn Configuration Manual

EtherTalk

The default setting is underlined.
EtherTalk-1
Enable/Disable EtherTalk.
AdminManager
[Setup] → [OKI Device Setup] → [EtherTalk] → [Use EtherTalk
Protocol]
Web Browser
[Security] → [Protocol ON/OFF] → [EtherTalk]
or
[Network] → [General Network Settings] → [Protocol Options] →
[EtherTalk]
TELNET
[Setup EtherTalk] → [EtherTalk protocol]
EtherTalk-2
Set the Zone Name to which the print server belongs. Up to 32
alphanumeric characters. Default is *.
AdminManager
[Setup] → [OKI Device Setup] → [EtherTalk] → [Zone Name]
Web Browser
[Network] → [EtherTalk] → [EtherTalk Zone Name]
TELNET
[Setup EtherTalk] → [Zone name]
Configuration: Configurable Items • 80
NOTE