Rear Panel Assembly - Sony PMW-EX1R Service Manual

2-2-9. Rear Panel Assembly

1. Refer to Sections from 2-2-1 to 2-2-5 and
disassemble the unit up to "Handle Assem-
bly" removal.
2. Refer to Section 2-2-8 and disassemble the
unit up to "Inside Panel Assembly/Outside
Panel Assembly" removal.
3. Remove the two screws of a that fi x the
SW-1484 board.
4. Remove the four screws of b.
5. Disconnect the harness from the connector
(CN1) on the RE-272 board.
6. Disconnect the CN-3273 (fl exible board)
from the connector (CN101) on the ASW-68
board.
7. Reinstall the rear panel assembly by reversing
the steps of removal.
2-10 (E)
ASW-68 board
(CN101)
Rear panel
assembly
a
SW-1484
a
board
CN-3273
board
a : M2 x 3 (silver)
b : M2 x 4 (black)
b
b
Harness
RE-272 board
(CN1)
PMW-EX1R