Adjustment Procedure
1. Set the Video Format by selecting the menus as follows:
[OTHERS] → [Video Format] → Select either [HQ 1080/60i] or [HQ 1080/50i].
2. Set the lens iris to OPEN, and set the shutter speed as follows to match the adjustment environment.
Select menus in order: [CAMERA SET] → [Shutter] → [Mode] → [Speed].
Next, select menus in order: [CAMERA SET] → [Shutter] → [Speed] and select an appropriate
shutter speed.
3. Set the ZOOM to TELE end, and adjust the camera position so that center of the chart stays approxi-
mately in the center of a screen.
Item
ZOOM POSITION
ZOOM
FOCUS
IRIS
GAIN
WHITE BAL
FULL AUTO
4. Enter the SERVICE menu and select [MAINTENANCE] → [Auto FB Adjust]. Then, execute Auto
FB Adjust.
5. Wait until Auto FB Adjust is complete.
6. Restart the camera.
Check after Adjustment
1. Set the lens iris to OPEN, set the ZOOM to TELE end and adjust the focus.
2. Move ZOOM from TELE end to WIDE end, and check that the lens remains in focus throughout the
travel between TELE end and WIDE end.
PMW-EX1R
Setting
Lens
_
TELE
_
SERVO
_
FULL MANUAL
_
OPEN
_
0dB
_
ATB
_
OFF
4-7 (E)