Microphone Unit - Sony PMW-EX1R Service Manual

2-2-24. Microphone Unit

1. Refer to Sections from 2-2-3 to 2-2-5 and
disassemble the unit up to "Handle Assem-
bly" removal.
2. Refer to Sections from 2-2-22 to 2-2-23 and
disassemble the unit up to "Microphone Unit
Assembly" removal.
3. Slightly peel off the sheet attached to the
microphone cover.
n
When reinstalling the microphone unit, attach
the sheet to the original position.
4. Remove the three screws of a, and remove
the microphone case.
5. Remove the screw of b, and remove the
microphone cover.
6. Disconnect the harness (KSW53-MA161)
(CN3) and the microphone unit harness (CN1,
CN2) from the MA-183 board.
7. Remove the two screws of c, and remove
the MA-183 board.
8. Disconnect the harnesses (KSW53-RM213)
(CN1) from the RM-224 board.
9. Remove the screw of d, and remove the
RM-224 board.
10. Reinstall the microphone unit by reversing
the steps of removal.
n
When assembling, attach the MA CUSHION
to the original place.
PMW-EX1R
Sheet
Microphone cover
Microphone cover
 : Tapping M2 x 5 (black)
 : Tapping M2 x 5 (black)
d
RM-224 board
Harness
(KSW53-RM213)
MA cushion
Peel off slightly.
Microphone unit
Microphone case


Microphone unit
Harness
(KSW53-MA161)
2
MA-183 board
c
c : Tapping M2 x 5 (black)
d : Tapping M2 x 5 (black)
2-23 (E)