Simrad AP26 Manual page 93

Simrad AP26 and AP27 Autopilots
• Changing modes. Explain briefly what takes place in the
• Regaining manual control from any mode. Point out in what
• Taking command at an "inactive" station, if applicable.
• Using the lock mode, how to lock/unlock and how to shut the
• Use of the Non-Follow-up and Follow-up steering modes and
• Use of a remote Non-Follow-up and Follow-up controller, if
• Changing course by rotary knob and buttons.
• Stepping through the User Set-up Menu learning how to (and
• How to select alternative sources for heading (compass),
• Understand the difference between NAV mode and NoDrift
• Locating compasses and knowing to keep magnetic items
• Locating the Mains circuit breaker and the separate SimNet
• Knowing the use of thrusters with the autopilot.
92
different modes.
modes the helm is engaged by the autopilot and vice versa,
see page 18.
system down from a locked control unit, if applicable.
learning the difference between the two.
connected.
why to) change the settings.
navigation (GPS), chartplotter), speed, depth etc. if available.
mode.
away.
circuit breaker if provided.
20222147A