Nav Change Limit; Parameters - Simrad AP26 Manual

Simrad AP26 and AP27 Autopilots

NAV change limit

4.7

Parameters

• HI value parameters for automatic steering at low speed
• LO value parameters for automatic steering at high speed
Step through the menu items by pressing the STBD or PORT
buttons. Adjust the value by rotating the course knob.
84
In NAV mode, when the
required course change at the
approaching waypoint is
bigger than the set limit, you
are prompt to verify that the
upcoming course change is
acceptable. The limit can be
set to 10°, 20° or 30°.
Default: 10°
To access the Parameters,
rotate the course knob
clockwise.
A boats steering parameters
found by the Automatic
tuning can be looked at and if
needed changed under this
menu item. The steering
parameters can also be set
manually instead of
performing an Automatic
tuning. The parameters are
divided into two sets:
20222147A