Simrad AP26 Manual page 45

Simrad AP26 and AP27 Autopilots
44
Compass
Select the compass to be used if more than one
compass is connected.
Note! Compass can only be selected in STBY mode
NAV source
Select a source for NAV mode steering.
Position
Select the source for position data.
Wind Angle
Select the source for Wind Angle.
Wind Calculated
Select the source for Calculated Wind data for the
Simrad group. The autopilot uses internal sources
irrespective of the selected source.
Water Speed
Select the source for water speed (normally the same
as the source providing Log data).
Water temperature
Select the source for water temperature (normally the
same as the source providing depth data).
DisLog
Select the Log source.
Depth
Select the source for depth data.
20222147A